Nottingham Window Tinting Hints and Tips

Window Tinting Tip 1
When tinting your windows yourself, you must do this in a warm, clean and calm environment. Make sure your vehicle is clean and that the windows to be tinted are bladed and squeegied.

Window Tinting Tip 2
Have a buddy help you when tinting your windows. Make sure the windows you're tinting are saturated with a soap and water mix. With tint laying on table, remove the plastic that covers the sticky side. While doing this, have your buddy spray the sticky newly uncovered window tint with the water mix. Lift tint making sure you only touch the edges and spray both sides of window tint (generously) down with water. Have your buddy assist you moving the tint into vehicle and setting it against the wet glass (careful not to touch the sticky side against anything!).

Window Tinting Tip 3
Start squeeging from center lightly and make sure the tint stays centered and saturated on outside. Take your time and use your finesse to effectively work water out from center

Window Tinting Tip 4
If window has large curve, you may need to use the hair dryer to warm up tint and work from center with generous water mix. Work squeegie as long as it takes to completely get all water mix out from under. Work edges if necessary with card to get tint under window guide seals.

Window Tinting Tip 5
Let the tint dry overnight in temperatures no less than 50 F.